Autonics Photomicro Sensors, model BS5-L1R-F, from the BS5 Series product line.
Specifications
- Item: Photomicro Sensor
- Sensing distance: 5mm(fixed)
- Sensing distance unit: mm
- Shape: L type
- Connection type: Cable type
- Indicator: Turns ON under the light interrupted condition
- Control output: NPN open collector output
- Cable feature: Flexible type
- Sensing type: Through-beam type
- Sensing distance: 5mm
- Sensing target: Opaque
- Min. sensing target: ≥Ø0.8mm×2mm
- Response time: Light ON: Max. 20㎲, Dark ON: Max. 100㎲
- Response frequency: 2kHz
- Light source: Infrared LED(940nm)
- Operation mode: Light ON/Dark ON(set by control wire)
- Indicator: Operation indicator (red LED)
- Weight_Body: Approx. 50g
- Power supply: 5-24VDC @(=) ±10%(ripple P-P : max. 10%)
- Load voltage: ≤30VDC@(=)
- Load current: Max. 100mA
- Residual voltage: NPN: ≤1.2VDC@(=), PNP: ≤ 1.2VDC@(=)
- Hysteresis(distance): ≤0.05mm
- Current consumption: Max. 30mA
- Protection circuit: Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
- Insulation resistance: ≥20 MΩ (250 VDC@(=) megger)
- Noise immunity: The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC@(=)
- Dielectric strength: Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute
- Vibration: 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
- Shock: 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
- Environment_Ambient illumination: Fluorescent lamp: Max. 1,000lx(received illumination)
- Environment_Ambient temperature: -20 to 55℃, storage : -25 to 85℃
- Environment_Ambient humidity: 35 to 85% RH, storage: 35 to 85% RH
- Protection structure: IP50 (IEC standard)
- Connection: Cable type
- Material: Case: PBT, Sensing part: PC
Downloadable Materials
